Air Swept Tubular Dryer

Scott's AST provides agitation that mixes hot air with the wet product entering the dryer inlet, reducing the drying time and breaking up lumps.  The dryer can reduce a slurry's moisture content (slurry dewatering) from 95% to 1% in a single phase. The unit's adjustable paddles and air dams facilitate a change in retention time and allow for variations in the drying process.

Dryer Features:

• Can dry materials ranging from 98% liquid slurries to fine powders

• Patented agitator design incorporates intense mixing and grinding action

• Less BTU's used due to high heat transfer coefficients through velocity and agitation

• Energy efficient accredited to a single pass system

• Lower exit temperature and residence time enable minimum product degradation

• Adaptability to product specifications and characteristics

• Low capital cost

• Custom design to meet customer specifics

• Ruggedly designed for years of trouble-free operation

• Single pass drying even with slurries up to 95% moisture

MORE SCOTT EQUIPMENT PAGES

RIBBON MIXERS | CONTINUOUS BLENDERS | PLOW MIXERS
CRUSHERS | FLASH DRYERS | COOLERS

HOME | ABOUT | FAQ | PRODUCTS | TESTIMONIALS | NEWS | SYSTEM DESIGN | CONTACT US

BULK PROCESS EQUIPMENT INC.
P.O. BOX 38586
Baltimore, Maryland 21231
Phone (410) 327-9242   Fax (410) 327-9212
www.bulk-process-equipment.com or
www.bulkprocessequipment.com 
E-mail: sales@bulk-process-equipment.com 

for search engine optimization